
ServicesResidential Roofing
Residential Roofing in Balch Springs
We install complete shingle roof systems on homes: sound decking, synthetic underlayment, new flashing, balanced ventilation and the shingles you pick. One person handles your questions and runs the job from the estimate to the final sweep of your yard.
A roof is a system, not just shingles
Shingles are the part you see, but they only shed water when everything under them is right. Decking has to be flat and solidly nailed. Underlayment has to lap in the correct direction. Flashing at walls, chimneys and pipes has to turn water out, not in. If one of those layers is wrong, a new roof can still let water into your home.
Our residential roofing work covers every one of those layers. We pull the old material down to the deck, deal with what we find, and build the roof back up in order. The same person who walks your roof for the estimate stays your contact through the permit, the install and cleanup, so you never have to repeat yourself to a new crew lead.
We are licensed and insured, and before any work starts we explain what each line on the estimate pays for.
What goes into the roof on your home
Stripping down to bare wood
We remove every shingle and the old felt beneath it until the plywood or OSB is fully exposed. Problems like swollen sheets, soft spots and rot around old vent pipes stay hidden until the deck is uncovered.
Decking and nailing
Damaged OSB or plywood sheets are cut out and replaced, and loose sheets are fastened down again. Shingle nails only hold in solid wood, so this step sets how well the roof stands up to wind.
Underlayment, drip edge and starter
Synthetic underlayment covers the deck, with a self-adhering membrane in valleys and around penetrations. Metal drip edge lines the eaves and rakes, and a starter strip seals the first course so wind can't get under it.
Flashing and pipe boots
We install new step flashing where the roof meets a wall, counterflashing where it's needed and fresh boots on plumbing vents. Reused, worn-out flashing is a common reason newer roofs leak along the edges.
Ventilation
We balance exhaust at the ridge with intake at the soffits. Through a long Texas summer, a poorly vented attic heats the shingles from below and shortens their life.
Shingles and ridge cap
Architectural shingles are our standard, and impact-resistant shingles are available if you want them. Every shingle is fastened to the manufacturer's nailing pattern, and the ridge is finished with matching cap.

Clues that your roof may need replacing
- Grit collecting under the roof edge
- Aging shingles shed their mineral coating, and that grit collects on driveways and patios. Dark bare spots on the roof show asphalt exposed to sunlight, which makes it crack sooner.
- Shingles bending up or dishing in
- Shingle corners that turn up, or tabs that sag into a dish shape, usually come from age or heat building in the attic. A misshapen tab catches the wind and sooner or later tears away.
- A dip in the roofline
- A low spot between rafters often signals decking that has absorbed water and weakened. Have it checked before adding any more load.
- Ceiling water marks
- Brown marks on a ceiling show water has already passed the shingles, underlayment and decking. Where it got in can be several feet higher on the slope than the mark.
- Light coming through attic boards
- Gaps that let sunlight through the boards can also let rain through.
How the job runs, start to finish
- 1
Your call and the free estimate
You call and set a time with the person who will coordinate your job. We walk the roof and attic, take photos and show you what we saw.
- 2
Line-item estimate, then the permit
The estimate breaks out materials, a decking allowance and any ventilation work on separate lines. After you sign off, we file for the permit and lock in your shingle color and delivery date.
- 3
Install day
Tarps go over landscaping and the driveway is kept clear. Most homes are torn off and dried in the same day, with shingles finished on the same day or the next depending on size.
- 4
Cleanup and final walk
We run a magnetic sweeper across the yard and driveway for nails. Your contact walks the finished roof with you and hands over the photos and project paperwork.
What your roof price depends on
Each estimate comes from measuring your actual roof, not from a set price per house. These are the items that change the total most. Each appears as its own line, so every dollar ties to a specific piece of the job.
- How big and how steep
- Roofing is priced by the square, which covers 100 square feet of roof. Steep slopes call for roof jacks and fall-protection harnesses and make the crew work slower, so each square costs more.
- Old layers coming off
- An extra layer of old shingles doubles the labor to strip it and the weight to haul away. We count your layers at the estimate and write the number down.
- State of the decking
- Rotted or soft sheets often stay hidden until the old roof comes off. Your estimate sets a price for each sheet, so replaced decking is counted and charged at a rate you approved ahead of time.
- Shingle type and venting
- Impact-resistant shingles are priced above standard architectural ones. Adding a ridge vent or opening soffit intake adds material and labor.
- Permit and roof details
- The permit fee gets a separate line. Dormers, valleys, chimneys and skylights all take added flashing and cutting time.
Questions about roofing your home
- How many days will my roof take?
- A typical single-story home takes one to two days. Bigger or steeper roofs may take more. Before materials are delivered, your contact gives you the planned schedule and calls if weather moves it.
- Does a warranty cover the roof?
- Eligible projects carry our workmanship warranty, and what it covers depends on the service. Before you sign, we put in writing what applies to your roof. The shingle maker's product warranty is separate from ours.
- Can a new roof cool down hot upstairs rooms?
- It can when the attic lacks ventilation. At the estimate we check soffit intake against ridge exhaust. If intake is blocked or exhaust is missing, balancing them lets hot attic air out rather than letting it heat the ceiling and bake the shingles from below.
- What if the decking turns out to be bad?
- We stop, take photos of the damaged sheets and show you before replacing anything. Your estimate already lists the price per sheet, so you know the cost ahead of time.
- Should I be home while you work?
- You don't have to be, but someone should answer the phone. Move cars to the street the night before, and take mirrors, pictures and shelf items off upstairs walls, since nailing vibration can shake them loose.
- What towns do you serve?
- We put roofs on homes in Balch Springs and nearby towns such as Mesquite, Seagoville and Forney. See the Service Areas page for the complete list.

Talk to the person who will run your roof
One phone call gets you a free estimate with photos and a line-item price. The person you speak with stays your contact until the last nail is swept up.